How to screw into veneer plaster wall without breaking plaster

Your Answer

Sign up or log in Sign up using Google Sign up using Facebook Sign up using Email and Password

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy


How do you hang something heavy from the ceiling?

How to Hang Very Heavy Objects From the Ceiling
  1. Locate the joist with a stud finder and mark the center of the joist with a pencil.
  2. Place the mounting bracket for the object over the pencil line and center it on the joist.
  3. Mark the mounting holes with the pencil.
  4. Drill pilot holes using the pencil marks as a guide.

Can I hang a TV on a plaster wall

Answered By: Aidan Sanchez Date: created: Nov 29 2021

Most mounts consist of two pieces. The first piece of the mount will attach to your wall. Use a drill and the provided hardware to mount it directly into the stud so that the plaster is not damaged. Attach the second piece of the bracket to your TV.

Asked By: Hugh Bennett Date: created: Nov 26 2021

How far should a screw go into a stud?

You want about 1″ (25mm) of penetration into the stud itself. If the gypboard is 1/2″-5/8″ (12–15mm) and the shelf cleat is 3/4″ (18mm) then a 2″ to 2 1/4″ (or about 50 to 60mm) screw should be fine.

Hanging Pictures on Drywall

There are several methods for hanging pictures on drywall. Here, we’ll cover a simple, sturdy, cheap method for hanging pictures with or without using a wall stud. You can hang a picture using only a drill, screws, and some drywall anchors.

How to Hang Pictures on Drywall Without Wall Stud

If there is no stud where you want to hang the picture on your drywall wall, first drill a hole and set a drywall anchor, followed by a screw. This will protect your drywall from damage and ensure your picture stays up. A screw drilled into drywall without an anchor is prone to tearing out of the wall, causing damage.

  • Use this set of drywall screws and anchors to hang items where there is no wall stud.
  • Do not use a screw without an anchor unless you are screwing into a stud. Unanchored screws in drywall will pull out.
  • Alternatively, use toggle bolts to suspend items on drywall where there is no wall stud.

While screws and anchors are a simple and sturdy solution for hanging pictures, there are other options. Toggle bolts pierce through drywall and brace against the back of the drywall. They make for a very durable hanging system that some manufacturers claim can hold upwards of 40 pounds (18 kilos) even where there is no stud behind the drywall.

HongWay 370pcs Plastic Drywall Wall Anchors Kit with Screws, Includes 5 Different Size Anchors and Screws $15.99 Buy Now We earn a commission if you click this link and make a purchase at no additional cost to you. 04/01/2022 01:29 am GMT

How much weight can a plaster wall hold

Answered By: Walter Ross Date: created: Jan 11 2022

Originally Answered: How much weight can a hollow wall/ plasterboard wall take? Your wall will be able to take as much weight as you can hang on it. Every 12″x12″ span of 1/2″ drywall can hold 40lb in pull out load, as if you were hanging from a ceiling. The other type of load is shear or pull down load.

Asked By: Miles Robinson Date: created: Oct 21 2020

Making Small Repairs

For smaller jobs, there’s no need to mix up a traditional lime- and sand-based plaster. Unless the house is very early or historically significant, a premixed joint compound like Murco Mud works fine.

If there are multiple cracks or areas to patch, use a dry joint compound that can be mixed to a desired consistency, such as Durabond, available at most builder’s supply stores and online. It comes in 20, 45, and 90 minute setting varieties. It cures quickly and is hard to sand, however, so for finish work use either premixed joint compound or a related product called Easy Sand, a lightweight setting-type mud with 25 to 90 minute setting times.

For scratch or brown coats, choose a basecoat plaster mix, such as Structo-Lite, a perlite-aggregate gypsum that is much lighter than a traditional sand-based plaster.

Do you provide any video tutorials for How To Screw Into Plaster?

Surely, we usually offer users the guidance in both posts and video tutorials for How To Screw Into Plaster. These videos are posted for the user’s reference with more details about the making way. Therefore, you can find by How To Screw Into Plaster searching on our tool to know more details.

Fixing a Water Damaged Plaster Ceiling

Plumbing leaks are fun, right? Not so much! While plaster ceiling are more resilient to water leaks compared to drywall they are not impervious to its ill effects.

Depending on whether you have lime or gypsum plaster it will respond differently to water damage. Old school lime plasters tend to crack and pull loose after repeated water damage due to the expansion and contraction of the lath which breaks the plaster keys off and usually results in a sagging plaster ceiling which we dealt with above.

Gypsum plaster is not as resistant to water damage and it has a tendency to bubble and turn to a powdery texture. You’ll see this bubbling behind the paint and it can best be dealt with by scrapping away any of the damaged gypsum and skimming the area with a couple fresh coats of joint compound, Sanding smooth, priming, and painting.

If you notice mildew or mold growth in the area it’s best to get rid of the mildew using the steps in this post before patching things to make sure it doesn’t come back.

You may also need to prime using a stain blocking primer like an oil-based interior primer or for very stubborn water stains you may need to upgrade to a shellac based primer to permanently keep the water stains at bay.

Best Screws for Plaster Walls: FAQs

What anchors to use in plaster walls?

Molly bolt and zinc plated anchor screws are the best anchor for plaster walls. However, in the field of choosing a screw, you must keep in mind whether the screw is long enough for your walls.

How much weight can a screw-in plaster hold?

Metal screws usually support plaster and drywall to carry heavy loads of 25 to 50 pounds or more. On the other hand, the plastic version screw can hold up to 10 to 25 pounds.

Do toggle bolts work on plaster walls?

Metal toggle bolts are perfect for taking heavy loads on plaster walls. However, if you are looking to hang medium and lightweight items, it is best not to use toggle bolts. Its installation process is a bit tricky for beginners.

What drill bit should I use for plaster?

In drilling with a regular drill bit, there is a chance of breaking masonry walls behind the plaster walls. So carbide drill is perfect for plaster.

How To Screw Into Plaster Details

The system has given 14 helpful results for the search "how to screw into plaster". These are the recommended solutions for your problem, selecting from sources of help. Whenever a helpful result is detected, the system will add it to the list immediately. The latest ones have updated on 21st May 2021. According to our, the search "how to screw into plaster" is quite common. Simultaneously, we also detect that many sites and sources also provide solutions and tips for it. So, with the aim of helping people out, we collect all here. Many people with the same problem as you appreciated these ways of fixing.

Delamination: Finish Coat Failure

Often only the top coat of plaster is failing. This is called delamination. If this is the case, scrape off the loose finish coat with a putty knife and brush away loose material. Leave any sound material intact.

Apply a plaster bonding agent (Plaster-Weld is one brand) over the damaged areas. Follow the bonding agent instructions carefully with regard to wall preparation and curing times. Then apply a new finish coat, using either veneer plaster or multiple coats of plaster compound.

Veneer plaster creates a thicker buildup in a single coat than drywall mud. For best results:

  1. Mix small batches to the consistency of mashed potatoes.
  2. Bring the plaster directly to the wall with the trowel and apply it in an arcing motion. (This may take some practice.)
  3. As the plaster begins to dry, brush a coat of water over it and smooth it out quickly. This will help the plaster cure to a smooth finish.

How to drill into plaster walls

To prevent cracking and crumbling you’ll need to pre-drill holes for your screws, and you can start by taping down a strip of blue tape before drilling holes into the wall—it’ll help make clean hole without as much crumbling. Make sure your drill bit is the same size as your plastic anchor or just a bit bigger for a snug fit with the screw, then drill right into the blue tape. Push or hammer the anchor into that hole, and then you can screw right into your anchor. 

G/O Media may get a commission

Save 42%The See-Everything Eufy Video Smart Lock All-In-One Home Security The See-Everything Eufy Video Smart Lock is exactly what that sounds like. Combining a video doorbell with a smart lock achieves full control over who enters your home in one package.