Content of the material
- Part 1. Why Do You Need to Flash a Phone?
- Before you flash phone— Try hard resetting
- Is flashing Android safe?
- How can I flash my Samsung phone with USB cable?
- How to flash a phone without a computer?
- How to Safely Disconnect an Android Flash Drive
- Part 1: How to flash Samsung Galaxy in one click
- Dr.Fone – System Repair (Android)
- Step by step Tutorial
- You Might Also Like
Part 1. Why Do You Need to Flash a Phone?
Prior to flashing your phone, you should know the reasons behind flashing a phone. There are several situations where you must flash your Android phone. But, here we will be sharing only a couple of those. If you are in these situations, then you have to flash your phone by following our methods which we will be sharing on this post later. So, let's see those reasons…
To fix phone stuck, bricked, dead, or locked issues:
We love Android phones because of their customizability and flexibility. However, since Android is open-source, it is also the most vulnerable to many operating system related issues. It is a familiar scenario that your phone might get stuck or get bricked out of nowhere. There are various fixes to these issues. However, the ultimate solution to these serious issues is to flash your phone.
To install new custom ROM:
Normally, your Android phone will come with a default OS (Operating System)/ROM. For some reasons, most of these stock Android ROMs are not the best option out there. As a result, a lot of people build custom ROMs which can be installed in the place of those stock ROMs.
Interestingly, those custom ROMs come with a bunch of additional features which are not typically available on the default OS. A custom ROM might make your phone faster, offer better battery backup, will give a new look (definitely) and so on. So, you must flash your phone in order to install a custom ROM.
Before you flash phone— Try hard resetting
You should know that flashing a phone has its consequences. First of all, you will lose all of your files and data from your phone. And secondly, you might not like the new custom ROM after installing it. That means you will have to go through the same process over again. Thirdly, sometimes a hard reset might fix a lot of issues automatically. Plus, if you mess up the procedure of flashing an Android phone, you might permanently damage your phone. So, you should try hard reset before going to flashing the phone.
There are hundreds of models of Android phones out there. And, not all of these phones can be reset to the factory settings following the same method. Each one has a different method. As a result, we can't share all of the available methods. Rather, we will share a basic method, which will be almost similar to all the methods available. So, here we go…
How to Hard Reset an Android Phone?
Remark: After a hard reset/factory reset, you will lose all the data from your phone including your apps, pictures, videos, audios, contacts and so on. So, you should take a backup before you do that. We have shared a method of backing up an Android phone down below. You can follow that.
Now, let's see how to factory reset your Android phone in a step by step manner.
Navigate to the 'Settings' menu on your Android phone
Then go to the 'Reset Option' by navigating to System > Advanced >Reset options
If you don't see these options, type in the search bar 'Reset' and search
In doing so, you will find the Reset option
Next tap on the Erase All Data/ Factory Reset option (Varies depending on the model)
Then tap on the 'Reset Phone' option. Then most of the time, you will need to enter your passcode/ PIN, or password of your phone
And, at last, tap on the 'Erase Everything' option and wait for the procedure to complete
That's it. Now, you can see if your problem is fixed
The above steps might be a little different on different devices. For the phones that are bricked or cannot work normally for other problems, remember that there is another way to factory reset your device by using power and volume buttons. However, this method also varies by phone manufacturers. Thus, you should visit your phone's support site for specific instructions based on your phone model.
Is flashing Android safe?
If you flash a custom ROM, you void your warranty. If you flash a stock ROM over top of an “unaltered” (e.g., never rooted) stock ROM through the manufacturer-approved process, then you should be safe, but flashing stock under other circumstances is no different from flashing a custom ROM.
How can I flash my Samsung phone with USB cable?
Connect the USB cable to phone, then to PC. Launch the odin software now. Make sure the following options are selected as seen in the photo below. Click the PDA option, to browse for the firmware/flash file you downloaded for your device.
How to flash a phone without a computer?
In order to install the Android ROM without PC properly, you should be aware that the installation has to be step-by-step and you have to be highly focused to perform it accurately and properly. If you perform your installation inaccurately, it could brick your Android device or cause errors. First of all, you are strongly suggested to move your personal photos, videos, music, and other important things somewhere in a reliable place, because they will be removed when you reset your phone to factory settings.
Best ways on how to transfer contacts from Android to iPhone
You will have to root your Android phone by downloading a special application Kingroot that allows phone rooting and completing the necessary steps. Apart from that, you need to install a custom recovery for additional features like backing up your information. You can do that without your PC, using only your mobile phone.
Now, once you have done all of that, follow the easy steps to flash your Android phone:
- If you want to install ROM without PC, you should search for custom ROMs on Google using your mobile browser. You should then download them to your SD card. If there is no space available, you are advised to delete the data that was previously stored on your SD card.
- Afterwards, you will need to turn off your mobile phone. By pressing the volume up or down button along with power button, you will turn on the custom recovery mode. There will be a few options on the screen: install, wipe, backup, restore, and others.
- When you have reached your custom recovery interface, you will need to make sure that you have backed up your stock ROM. Choose the backup option and see which elements are present there. If you have not backed up your stock ROM yet, you will be able to choose the storage path where you would like to save it.
- The next step will be factory resetting your device, which means resetting it to the original settings it came with. If you want to do that, you should choose the wipe option and swipe to right.
- When you have already reset your Android device, you then should wipe the remaining system partitions. For that, you need to go back to the wipe options and do an advanced wipe.
- Then, you need to check the system option and swipe to the right to clear it. This step is really important, so you should not skip it.
- Now, you can start installing your software. When you have already completed all the previous steps, you need to begin the installation of your custom ROM, which is being stored on your SD card. To do that, you need to click the install option and select the custom ROM files from the SD card. Then you need to swipe right to flash the custom ROM on your device and wait until the process is completed. The time of waiting usually varies, so do not do anything with your phone until it is ready, in order to avoid errors.
- When the custom ROM is installed successfully, it will show a success message on your screen. After the process is done, you should reboot the system.
- Congratulations! You have installed your custom ROM on your Android device using only your phone.
How to update iTunes: these simple steps will wow you
In case you are having any problems, you should search for the solutions on Google or ask someone who is fluent in it. Generally, the process of installation is not very difficult, and everyone who wants to do it is able to complete it. You just need to be attentive and follow all the steps thoroughly.
If you have finished the installation of your custom ROM successfully, then congrats on your new system! Now, your Android phone will be working smoothly and have new brilliant features.
READ ALSO: How to format Android phone using computer
How to Safely Disconnect an Android Flash Drive
When you don’t need the Android USB drive, you can follow this instruction below to safely disconnect the USB drive.
Step 1. Swipe down from the top of the screen.
Step 2. Tap the USB mass storage connected. Then you can now safely disconnect your flash storage device.
Now you should know how to safely disconnect the Android flash drive. It is not a difficult thing to connect and disconnect a flash drive to your Android.
After knowing how to connect a flash drive to an Android, you can use the USB drive on Android at ease no matter if you want to transfer files or play media files stored on the USB drive.
By following this post, I successfully connect my flash drive to my Android. Now I can transfer files from android to flash drive easily. I’d like to share this post with more friends who want to use a flash drive for Android.Click to tweet
Part 1: How to flash Samsung Galaxy in one click
While you are worried about how to flash Samsung Galaxy instantly with a single click, Dr.Fone – System Repair (Android) swiftly makes its way with a galore of options for you. This amazing tool from Wondershare can fix a plethora of Android system issues such as crashing of apps, black screen of death, failed system update, etc. Moreover, it can also get your device out of boot loop, unresponsive bricked Android mobiles as well as stuck at Samsung logo.
Dr.Fone – System Repair (Android)
One-click solution to flash Samsung Galaxy
- The high success rate in fixing Samsung Android devices.
- All the latest Samsung devices are supported by this software.
- One-click operation of this tool helps you how to flash Samsung Galaxy easily.
- Being very intuitive, it doesn’t need you to be tech-savvy to use this software.
- It is one of its kind and first one-click Android repair software in the market.
Available on: Windows Start Download 3981454 people have downloaded it
Step by step Tutorial
We are going to explain how to flash dead Android phone using PC using Dr.Fone – System Repair (Android)
Note: Before you understand how to flash Dead Android phone, take a backup of your data and then proceed to avoid any data loss.
Phase 1: Prepare your Android device
Step 1: Once you have downloaded and installed Dr.Fone, launch it. From the main menu, tap on the ‘System Repair’ and get your Android device connected to it.
Step 2: Click ‘Android Repair’ from the available options, and then press the ‘Start’ button to fix Dead Android phone by flashing it.
Step 3: On the device information screen, pick the appropriate device brand, name, model, and other details followed by tapping the ‘Next’ button.
Phase 2: Put Android device in Download mode to start repair.
Step 1: It is essential to boot your Android device in Download mode before repairing.
- If the device has a ‘Home’ button: Turn it off and then hold down the ‘Volume Down’, ‘Home’, and ‘Power’ buttons altogether for 5-10 seconds. Un-hold all of them and hit the ‘Volume Up’ button for entering ‘Download’ mode.
- In the absence of a ‘Home’ button: Switch off the Android device and hold the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons for 5 to 10 seconds, then release them. Hit the ‘Volume Up’ button for entering the ‘Download’ mode.
Step 2: Press the ‘Next’ button for initiating firmware download.
Step 3: Once the firmware gets downloaded and verified Dr.Fone – System Repair (Android) starts to flash your Dead Android phone. All the Android system issues will be fixed soon after.
You Might Also Like
6 Solutions to Fix Error 505 in Google Play Store
5 Solutions for Android Process System isn’t Responding Error
Authentication Error Occurred? Here Are 10 Proven Fixes